Timeguard SLFM360 User Manual
Page 9
8
to operate too early (ie. when it is quite light), adjust
the control slightly anti-clockwise. If the unit starts to
operate too late (ie. dusk), adjust the control slightly
clockwise.
Continue to adjust until the unit operates as desired.
Once the unit is set up as desired, ease the unit back
into position under spring pressure.
Manual Override Mode
The light can be switched on for longer time periods by
use of the Manual Override Mode. This can be
activated at night by using the isolation switch.
Switch the isolation switch twice (off/on, off/on)
within 2 seconds. The unit will now illuminate
continuously until dawn or until it is switched back
into Detection Mode.
To return to Detection Mode switch the isolation switch
off and then back on again within 1 second.
SLFM360_Instruct_art_2.2.qxd 3/5/06 10:05 am Page 9