UEi Test Instruments KM940 - Manual (Page 12)

- 12 -
4.3.2 Line Scroll Mode
Line scroll mode allows you to customise the display.
Use the and keys to change the bottom line of the display. Once the correct line
is displayed press to confirm and move the line up. Select the next parameter and
repeat until all lines display the desired parameters.
Change bottom line using
and NETT C . . . 0.0
O2 % . . . 20.9
CO ppm . . 0000
CO2 % . . . 0.0
to select and move
parameter up O2 % . . . 20.9
CO ppm . . 0000
CO2 % . . . 0.0
CO2 % . . . 0.0
Select next parameter.
Repeat above until
display reads desired data O2 % . . . 20.9
CO ppm . . 0000
CO2 % . . . 0.0
CO/CO2 R . . 0.0001
4.3.3 8 Page Mode
Displays 8 parameters on the screen at one time. Symbols used in this mode are different to
those used in 4 page and line scroll modes and are detailed in Appendix A - MAIN DISPLAY
PARAMETERS.
O2
CO
PI
λ
:20.9 %
: 0ppm
: - -
: - - CO2
Eff
∆T
Tf : - -
: - -
: 0C
: 21C
The bottom line of the display can be changed to display other parameters.
Use the and keys to change this line.