Brother PT-P700 - Manual (Page 10)

Raster Command Reference
- 6 -
2. Print Data
(3) Raster data
Repeated for each page in the print job.
Sequence Command Name Description/Example
-
Raster graphics
transfer
Sends a raster line that contains data with pixels set to “ON”.
- Zero raster graphics
Se nds a raster line with all pixels set to “0”.（Valid only when TIFF
is selected as the compression mode）
5Ah (Fixed)
(4) Print commands
Specified at the end of the page.
Sequence Command Name Description/Example
- Print command
Specifies at the end of a page that is not the last page.
0Ch（Fixed）
-
Print command with
feeding Specifies at the end of the last page.
1Ah (Fixed)