Brother PT-P700 - Manual (Page 32)

Raster Command Reference
- 28 -
4. Printing Command Details
(5) Status type
Status Type Value
Reply to status request 00h
Printing completed 01h
Error occurred 02h
Exit IF mode 03h (not used)
Turned off 04h
Notification 05h
Phase change 06h
(Not used) 07h to 20h
(Reserved) 21h to FFh
If an error occurred during printing, the printer returns the error status.
(6) Phase type and phase number
If the phase number is not used, both are fixed at 00h.
Phase State Phase Type
Editing state (reception possible) 00h
Printing state 01h
Editing state
Phase Value (Dec.) Higher Order Bytes Lower Order Bytes
Editing state (reception
possible)
0 00h 00h
Feed 1 00h 01h
Printing state
Phase Value (Dec.) Higher Order Bytes Lower Order Bytes
Printing 0 00h 00h
(Not used) 10 00h 0Ah
Cover open while
receiving
20 00h 14h
(Not used) 25 00h 19h