Brother PT-P700 - Manual (Page 6)

Raster Command Reference
- 2 -
About Raster Commands
About Raster Commands
Using raster commands an PT- XXXX printer (where “XXXX” is the model name) can be used to print without
using our printer driver.
This operation is useful in the following situations.
 When printing from an operating system other than Windows
(Example: When printing from a Linux computer or mobile terminal)
 When adding print functions to an existing system
In addition, printing can be performed with advanced settings.
In this material, “raster” refers to binary bitmap data (collection of dots).
Refer to this material to print by sending initialization commands and control codes together with raster data to
the PT-X XXX printer (hereafter, referred to as “printer”).
This manual describes the procedure for adding these codes and sending the data.