Ata/ide configuration [compatible mode – Asus TS300-E3 User Manual
Page 101
A S U S T S 3 0 0 - E 3
A S U S T S 3 0 0 - E 3
A S U S T S 3 0 0 - E 3
A S U S T S 3 0 0 - E 3
A S U S T S 3 0 0 - E 3
5 - 1 5
5 - 1 5
5 - 1 5
5 - 1 5
5 - 1 5
ATA/IDE Configuration [Compatible Mode]
ATA/IDE Configuration [Compatible Mode]
ATA/IDE Configuration [Compatible Mode]
ATA/IDE Configuration [Compatible Mode]
ATA/IDE Configuration [Compatible Mode]
Allows selection of the IDE operation mode depending on the installed
operating system (OS). Set to [Enhanced Mode] if you are using native OS,
e.g. Windows
®
2000/XP. Set to [Compatible Mode] if you are using legacy
OS, e.g. Windows ME/98/NT, MS-DOS. Configuration options: [Disabled]
[Compatible Mode] [Enhanced Mode]
5.3.4
5.3.4
5.3.4
5.3.4
5.3.4
IDE Configuration
IDE Configuration
IDE Configuration
IDE Configuration
IDE Configuration
The items in this menu allow you to set or change the configurations for
the IDE devices installed in the system. Select an item then press <Enter>
if you want to configure the item.
The C o n f i g u r e S A T A a s
C o n f i g u r e S A T A a s
C o n f i g u r e S A T A a s
C o n f i g u r e S A T A a s
C o n f i g u r e S A T A a s and T h i r d I D E M a s t e r / S l a v e
T h i r d I D E M a s t e r / S l a v e
T h i r d I D E M a s t e r / S l a v e
T h i r d I D E M a s t e r / S l a v e
T h i r d I D E M a s t e r / S l a v e options
appear only when you set the ATA/IDE Configuration to
[Enhanced Mode].
Configure SATA As [IDE]
Sets the configuration for the Serial ATA connectors supported by the
Southbridge chip.
If you want to use the Serial ATA hard disk drives as Parallel ATA
physical storage devices, set this item to [IDE].
Set this item to [RAID] if you want to create a RAID 0, RAID 1, RAID
0+1, or software RAID 5 configuration using the Intel
®
Matrix Storage
Manager or if you want to create a RAID 0, RAID 1, RAID 0+1
configuration using the LSI Logic Embedded SATA RAID Setup Utility.
The AHCI allows the onboard storage driver to enable advanced Serial
ATA features that increases storage performance on random
workloads by allowing the drive to internally optimize the order of
commands.
IDE Configuration
ATA/IDE Configuration
[Compatible]
Legacy IDE Channels
[SATA Pri, PATA Sec]
Primary IDE Master
:
[Not Detected]
Primary IDE Slave
:
[Not Detected]
Secondary IDE Master
:
[Not Detected]
Secondary IDE Slave
:
[Not Detected]
IDE Detect Time Out (Sec)
[35]
Select Screen
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
Main
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
Options
Disabled
Compatible
Enhanced