Asus TS300-E3 - Manual (Page 125)

A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3 5 - 3 9 5 - 3 9 5 - 3 9 5 - 3 9 5 - 3 9
Exit & Save Changes Exit & Save Changes Exit & Save Changes Exit & Save Changes Exit & Save Changes
Select this option then press <Enter>, or simply press <F10>, to save your
changes to CMOS before exiting the Setup utility.
When a confirmation window appears, select [OK] then press <Enter> to
save your changes and exit Setup. If you wish to cancel the command,
select [Cancel] then press <Enter> to return to the Exit menu.
Exit & Discard Changes Exit & Discard Changes Exit & Discard Changes Exit & Discard Changes Exit & Discard Changes
Select this option then press <Enter> to exit the Setup utility without
saving your changes.
When a confirmation window appears, select [OK] then press <Enter> to
discard your changes and exit Setup. If you wish to cancel the command,
select [Cancel] then press <Enter> to return to the Exit menu.
Discard Changes Discard Changes Discard Changes Discard Changes Discard Changes
Select this option then press <Enter> to discard the changes that you
made, and restore the previously saved settings.
When a confirmation window appears, select [OK] then press <Enter> to
discard the changes, and load the previously saved settings. If you wish to
cancel the command, select [Cancel] then press <Enter> to return to the
Exit menu.
If you made changes to any of the settings in the menus, pressing <Esc>
does not immediately exit this menu. A confirmation window appears
and prompts you to either save your changes or cancel the command.
Select one of the options from this menu to exit.
5.7 Exit menu
The Exit menu items allow you to load the optimal or failsafe default values
for the BIOS items, and save or discard your changes to the BIOS items.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Security Boot Exit
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults