1 overview overview overview overview overview – Asus TS300-E3 User Manual
Page 30
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
2 - 1 0
2 - 1 0
2 - 1 0
2 - 1 0
2 - 1 0
2.4
System memory
2.4.1
2.4.1
2.4.1
2.4.1
2.4.1
Overview
Overview
Overview
Overview
Overview
The motherboard comes with four Double Data Rate II (DDR2) Dual Inline
Memory Modules (DIMM) sockets to support 240-pin DDR modules.
The figure illustrates the location of the DDR DIMM sockets:
2.4.2
2.4.2
2.4.2
2.4.2
2.4.2
Memory configurations
Memory configurations
Memory configurations
Memory configurations
Memory configurations
You may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered ECC or
non-ECC DDR2-533/667 DIMMs into the DIMM sockets.
•
Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor. Refer to the DDR2 Qualified Vendors List at
the ASUS web site.
•
When installing one or two DIMMs, install the DIMM(s) to the blue
slots (DIMM_A2/DIMM_B2).
•
Three DDR DIMMs intalled into any three memory sockets will
function in single-channel mode.
LAN2
®
P5MT Series 240-pin DDR2 DIMM sockets
DIMM_A1
DIMM_B2
DIMM_B1
DIMM_A2
112 Pins
128 Pins