Asus TS300-E3 - Manual (Page 141)

A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3 6 - 1 5 6 - 1 5 6 - 1 5 6 - 1 5 6 - 1 5
6.2.3 6.2.3 6.2.3 6.2.3 6.2.3 Adding or viewing a RAID configuration Adding or viewing a RAID configuration Adding or viewing a RAID configuration Adding or viewing a RAID configuration Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration
using the V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n command.
Adding a new RAID configuration Adding a new RAID configuration Adding a new RAID configuration Adding a new RAID configuration Adding a new RAID configuration
To add a new RAID configuration:
1. From the Management Menu, highlight Configure C o n f i g u r e C o n f i g u r e C o n f i g u r e C o n f i g u r e, then press <Enter>.
2. Use the arrow keys to select V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n V i e w / A d d C o n f i g u r a t i o n, then press
<Enter>.
3. The A R R A Y S E L E C T I O N M E N U A R R A Y S E L E C T I O N M E N U A R R A Y S E L E C T I O N M E N U A R R A Y S E L E C T I O N M E N U A R R A Y S E L E C T I O N M E N U displays the available drives
connected to the SATA ports. Select the drive(s) you want to include
in the RAID set, then press <SpaceBar>. When selected, the drive
indicator changes from R E A D Y
R E A D Y R E A D Y R E A D Y R E A D Y to ONLIN A[X]-[Y] ONLIN A[X]-[Y] ONLIN A[X]-[Y] ONLIN A[X]-[Y] ONLIN A[X]-[Y], where X is the
array number, and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of
the screen.