Asus TS300-E3 - Manual (Page 175)

A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3 A S U S T S 3 0 0 - E 3 6 - 4 9 6 - 4 9 6 - 4 9 6 - 4 9 6 - 4 9
4. Press <Esc>.
5. When prompted, select <Save changes, then exit this menu> < S a v e c h a n g e s , t h e n e x i t t h i s m e n u > < S a v e c h a n g e s , t h e n e x i t t h i s m e n u > < S a v e c h a n g e s , t h e n e x i t t h i s m e n u > < S a v e c h a n g e s , t h e n e x i t t h i s m e n u >,
then press <Enter>.
To delete a hot spare drive assigned to a RAID set:
1. From the RAID Properties screen, press <F2> to select
< A d d / D e l e t e H o t S p a r e >
< A d d / D e l e t e H o t S p a r e > < A d d / D e l e t e H o t S p a r e > < A d d / D e l e t e H o t S p a r e > < A d d / D e l e t e H o t S p a r e >.
2. Use the arrow keys to select the spare drive you want to delete.
3. Move the selection to the H o t S p a r e H o t S p a r e H o t S p a r e H o t S p a r e H o t S p a r e column, then press <Enter> to
change the Hot Spare status to [ N o ] [ N o ] [ N o ] [ N o ] [ N o ].
4. Press <Esc>.
5. When prompted, select <Save changes, then exit this menu> < S a v e c h a n g e s , t h e n e x i t t h i s m e n u > < S a v e c h a n g e s , t h e n e x i t t h i s m e n u > < S a v e c h a n g e s , t h e n e x i t t h i s m e n u > < S a v e c h a n g e s , t h e n e x i t t h i s m e n u >,
then press <Enter>.
Next Array Next Array Next Array Next Array Next Array
The Next Array menu allows you to select the other array on the physical
adapter. This screen is enabled when there are more than one array on a
physical adapter. The RAID Properties screen allows display of one array at
a time. This menu allows you to display and operate on the other array(s)
detected.
Activate Array Activate Array Activate Array Activate Array Activate Array
When there are two arrays on a physical adapter, this menu allows you to
instruct the RAID firmware to activate a selected array. Only one array may
be activated at a time for each physical adapter. For a physical adapter
with multiple arrays, activating one array disables all the remaining arrays.