Aastra Telecom 675xi Series - Manual (Page 29)

New Features in Release 2.4
RN-001029-03, Release 2.4, Rev 00 25
SIP IP Phone Models 9143i, 9480i, 9480i CT, and 675xi Series Phones Release Note 2.4
You can use the following configuration file parameters to control which key types to display and
specify in which order to display them in:
• softkey selection list
• feature key selection list
If no value is specified for the “softkey selection list” and/or “feature key selection list”
parameters, the key “Type” list displays all of the key types by default.
If an Administrator configures specific key types for a phone in the configuration file, and the
phone for which he will download the configuration to already has key types configured on it,
those key types display in the key list for those keys, in addition to the key types specified by the
Administrator. For example, a phone has a Park key and a Pickup key already configured on the
phone, and the Administrator downloads a configuration file to the phone that has specific key
types of None, Line, Speeddial, and XML. After the configuration file is downloaded, the Park key
list will show None, Line, Speeddial, XML, and Park; the Pickup key list will show None, Line,
Speeddial, XML, and Pickup; all other keys that were configured as None before the download
will show only None, Line, Speeddial, and XML.
Notes:
1. Any key types configured that do not apply to the phone are
ignored.
2.
The SAVE and DELETE keys appear by default as Keys 1 and 2 on
the 6753i and 9143i, unless specifically allowed by the Administrator to
be configurable.
3.
An Administrator must use the English value when configuring the
key types in the configuration files.
5.
After configuring specific key types for a phone, the key types in
the Aastra Web UI display the same for both the User and Administrator
Web interfaces for that phone.