Aastra Telecom 675xi Series - Manual (Page 31)

New Features in Release 2.4
RN-001029-03, Release 2.4, Rev 00 27
SIP IP Phone Models 9143i, 9480i, 9480i CT, and 675xi Series Phones Release Note 2.4
Handset Feature Keys (for CT Models ONLY)
Use the following parameters to specify key types to display in the “Type” list for feature keys.
Limitation
The following is a limitation of the configuration key type list feature:
• Entering duplicate values for the parameters in the configuration file displays duplicate entries
in the “Type” list in the Aastra Web UI.
Range Any of the key types in the “Default Value” field above.
Example softkey selection list: blf, speeddial, line, xml
Parameter –
feature key selection list Configuration Files aastra.cfg, <mac>.cfg
Description Allows you to specify which key types to display and the order in
which to display them in the “Type” list for the feature keys (CT
models only) when configuring the keys in the Aastra Web UI.
If no value is specified for this “feature key selection list” parameter,
the key “Type” list displays ALL of the key types by default in the
Aastra Web UI.
:
1.
Any key types configured that do not apply to the phone’s
environment are ignored.
2.
An Administrator must use the English value when configuring
the key types in the configuration files.
3.
Any key type already configured on a phone displays in that
key’s “Type” list, in addition to the values specified for this parameter.
4.
After configuring specific key types for a phone, the key types in
the Aastra Web UI display the same for both the User and
Administrator Web interfaces for that phone.
Format Alpha Characters in a comma separated list
Default Value
Range Any of the key types in the “Default Value” field above.
Example feature key selection list: line, dir, callers
• none • park
• line • pickup
• icom • conf
• dir • private
• callers • public
• xfer • flash