Aastra Telecom 675xi Series User Manual
Page 36
New Features in Release 2.4
32
RN-001029-03, Release 2.4, Rev 00
IP Phone Release Notes 2.4
Configuring the Auto-Resync Functionality Using the Aastra Web UI
Use the following procedure to set the Auto-Resync parameters.
Aastra Web UI
1
Click on Advanced Settings->Configuration Server->Auto-Resync.
2
In the “Maximum Delay” field, enter maximum time, in minutes, the phone waits past the scheduled time before
starting a checksync. Valid values are 0 to 1439. Default is 15 minutes.
3
In the “Days” field, enter the amount of days that the phone waits between checksync operations. Valid values are
0 to 364. Default is 0 days.
Note: A value of 0 causes the phone to checksync every time the clock reads the proper time. A value of 1 forces
the phone to wait 24 hours prior to doing the first checksync.
4
Click
to save your setting.
Maximum Delay Parameter
Days Parameter