Aastra Telecom 675xi Series - Manual (Page 30)

New Features in Release 2.4
26 RN-001029-03, Release 2.4, Rev 00
IP Phone Release Notes 2.4
Configuring the Key Type List Using the Configuration Files
Softkeys, Programmable Keys, Expansion Module Keys
Use the following parameters to specify key types to display in the “Type” list for softkeys,
programmable keys, and expansion module keys.
Parameter –
softkey selection list Configuration Files aastra.cfg, <mac>.cfg
Description Allows you to specify which key types to display and the order in
which to display them in the “Type” list for softkeys, programmable
keys, and/or expansion module keys when configuring the keys in the
Aastra Web UI.
If no value is specified for this “softkey selection list” parameter, the
key “Type” list displays ALL of the key types by default in the Aastra
Web UI.
:
1.
Any key types configured that do not apply to the phone’s
environment are ignored.
2.
The SAVE and DELETE keys appear by default as
Keys 1 and 2 on the 6753i and 9143i, unless specifically allowed by
the Administrator to be configurable.
3.
An Administrator must use the English value when configuring
the key types in the configuration files.
4.
Any key type already configured on a phone displays in that
key’s “Type” list, in addition to the values specified for this parameter.
5.
After configuring specific key types for a phone, the key types in
the Aastra Web UI display the same for both the User and
Administrator Web interfaces for that phone.
Format Alpha Characters in a comma separated list
Default Value
• none • lcr
• line • call forward
• speeddial • blf/xfer
• dnd • speeddial/xfer
• blf • speeddial/conf
• list • directory
• acd • callers
• dcp • conf (6753i, 9143i)
• xml • xfer (6753i, 9143i)
• webapps • icom
• flash • services
• sprecode • phonelock
• park • paging
• pi ckup • empty (6755i, 6757i,
6757 CT, 9480i, 9480i CT)