Overview, For windows® 2000/xp and windows vista™ users, Configuring the standard tcp/ip port – Brother MFC-685CW User Manual

Page 108: Printer driver not yet installed, Network printing from windows, Overview for windows, Basic tcp/ip peer-to-peer printing, For windows, 2000/xp and windows vista™ users

Advertising
background image

100

8

8

Overview

8

If you are a Windows

®

user and want to print using the TCP/IP protocol in a Peer-to-Peer environment, please

follow the instructions in this chapter. This chapter explains how to install the network software and the printer
driver which you will need to be able to print using your network printer.

Note

• You must configure the IP address on your machine before you proceed with this chapter. If you have not

configured the IP address, see Setting up the IP address and subnet mask on page 12 first.

• Verify the host computer and print server are either on the same subnet, or that the router is properly

configured to pass data between the two devices.

• If you are connecting to a Network Print Queue or Share (printing only), see Installation when using a

Network Print Queue or Share (printer driver only) on page 116 for installation details.

For Windows

®

2000/XP and Windows Vista™ users

8

By default, Windows

®

2000/XP and Windows Vista™ systems install the necessary print software to enable

you to print. This section describes the most commonly used configuration, Standard TCP/IP Port printing.
If you have already installed the printer driver, jump to Printer driver already installed on page 101.

Configuring the standard TCP/IP port

8

Printer driver not yet installed

8

a

Put the supplied CD-ROM into your CD-ROM drive. If the model name screen appears, choose your
machine. If the language screen appears, choose your language.

b

The CD-ROM main menu will appear. Click Install Other Drivers or Utilities.

c

Click Printer Driver (Only, for network).

d

Click Next in response to the Welcome message. Follow the on-screen instructions.

e

Select Standard Installation and click Next.

f

Select Brother Peer-to-Peer Network Printer, and then click Next.

g

Follow the on-screen instruction, and then click OK.

Note

Contact your administrator if you are not sure about the location and name of the printer on the network.

h

Continue through the Wizard clicking Finish when complete.

Network printing from Windows

®

basic

TCP/IP Peer-to-Peer printing

8

Advertising
This manual is related to the following products: