Brother MFC-685CW - Manual (Page 97)

Control panel setup
89
6
c (For Wired) Press a or b to select Wired LAN.
(For Wireless) Press a or b to select WLAN.
Press OK.
d
Press a or b to select TCP/IP.
Press OK.
e
Press a or b to select DNS Server.
Press OK.
f Press a or b to select Primary or Secondary.
Press OK.
g Enter the DNS Server address.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first three-digit number for the DNS Server address.
Press c to enter the second three-digit number. Repeat this step until you have entered the fourth three-
digit number to complete the DNS Server address. Press OK.
h Press Stop/Exit.
APIPA
6
The setting of On will cause the print server to automatically allocate a Link-Local IP address in the range
(169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the BOOT
Method you have set (see BOOT Method on page 82). Selecting Off means the IP address doesn’t change,
when the print server cannot obtain an IP address through the BOOT Method you have set.
a Press Menu.
b Press a or b to select LAN.
Press OK.
c (For Wired) Press a or b to select Wired LAN.
(For Wireless) Press a or b to select WLAN.
Press OK.
d
Press a or b to select TCP/IP.
Press OK.
e
Press a or b to select APIPA.
Press OK.
f Press d or c to select On or Off.
Press OK.
g Press Stop/Exit.