Brother MFC-685CW User Manual
Page 31
Configuring your machine for a wireless network
23
3
If you want to add a new SSID name, go to i.
i
Select <New SSID> using a or b.
Press OK. Go to j.
j
Enter the SSID name. (For information how to type text, see Entering Text on page 125.)
Press OK. Go to k.
k
Using a or b, select Infrastructure when instructed.
Press OK. Go to l
If you select Ad-hoc, go to m.
l
Select the Authentication method using a or b, and press OK.
If you select Open System, go to m.
If you select Shared Key, go to n.
If you select WPA/WPA2-PSK, go to q.
m
Select the Encryption type, None or WEP using a or b, and press OK.
If you select None, go to s.
If you select WEP, go to n.
n
Select the key option; KEY1, KEY2, KEY3, KEY4 using a or b, and press OK.
If you select the key which shows **********, go to o.
If you select a blank key, go to p.
o
If you want to change the key you selected in n, press a or b to select Change. Press OK. Go to p.
If you want to keep the key you selected in n, press a or b to select Keep. Press OK. Go to s.
p
Enter a new WEP key. Press OK. Go to s. (To manually enter the text, see Entering Text on page 125)
q
Select the Encryption type, TKIP or AES using a or b. Press OK. Go to r.
r
Enter the password and press OK. Go to s. (To manually enter the text, see Entering Text on page 125)
s
The following will be displayed.
To apply the settings, select Yes. To cancel, select No.
If you select Yes, go to t.
If you select No, go back to h.
t
The machine starts to connect to the wireless device you have selected.
u
If your wireless device is connected successfully, the display shows Connected for 60 seconds and
configuration is completed.
If the connection failed, the display shows Connection Error for 60 seconds. See Wireless network
v
Press OK.