Brother MFC-685CW - Manual (Page 16)

Introduction
8
1
Protocols
1
TCP/IP protocols and functions
1
Protocols are the standardized sets of rules for transmitting data on a network. Protocols allow users to gain
access to network connected resources. The print server used on this Brother product supports the TCP/IP
(Transmission Control Protocol/Internet Protocol) protocols. TCP/IP is the most popular set of protocols used
for communication such as Internet and E-mail. This protocol can be used in almost all operating systems
such as Windows
®
, Macintosh
®
and Linux. The following TCP/IP protocols are available on this Brother
product.
DHCP/BOOTP/RARP
1
By using the DHCP/BOOTP/RARP protocols, the IP address can be automatically configured.
Note
To use the DHCP/BOOTP/RARP protocols, please contact your network administrator.
APIPA
1
If you do not assign an IP address manually (using the control panel of the machine or the BRAdmin software)
or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA)
protocol will automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255.
DNS client
1
The Brother print server supports the Domain Name System (DNS) client function. This function allows the
print server to communicate with other devices by using its DNS name.
LPR/LPD
1
Commonly used printing protocols on a TCP/IP network.
Port9100
1
Another commonly used printing protocol on a TCP/IP network.
mDNS
1
mDNS allows the Brother print server to automatically configure itself to work in a Mac OS
®
X Simple Network
Configured system. (Mac OS
®
X 10.2.4 or greater).
TELNET
1
The Brother print server supports TELNET server for command line configuration.
SNMP
1
The Simple Network Management Protocol (SNMP) is used to manage network devices including computers,
routers and Brother network ready machines.