Brother NC-7100W - Manual (Page 144)

APPENDIX B - 12
Using a Web Browser to Configure the Wireless Print
Server (for Windows
® users)
The steps required to configure the wireless print server using a web
browser is as follows:
1 Connect to the print server IP address using your web browser.
For example; http://10.148.xxx.xx.
2 Click Network Configuration. You will be prompted for a
password. The default user name and password is “admin” and
“access”.
3 Click Configuration Wireless.
For the wireless settings list when using a web browser, see Wireless
settings and status on page B-11.
NC-7100w Print Server Specifications
Model name NC-7100w
Network types IEEE802.11b/g wireless
Frequency 2400-2483.5 MHz
RF channels US and Canada 1-11
Europe 1-13
Australia 1-13
Communication
mode Infrastructure, Ad-hoc 802.11 (802.11b only)
Data rates 802.11b 11/5.5/2/1 Mbps
802.11g 54/48/36/24/18/12/9/6 Mbps
Link distance 90 m (295 ft.) at lowest data rate
(The distance rate will vary upon miscellaneous
items.)
Network security SSID, 128 (104) / 64 (49) bit WEP
Interface AIO
LED 2 LEDs (POWER, TX/RX)
Button 1 Network Test Button