Brother NC-7100W - Manual (Page 25)

1 - 11 UNIX ® PRINTING
SCO UNIX ® requires TCP/IP V1.2 or later to work with Brother print
servers. You must first configure the /etc/hosts and /etc/
printcap files as described in step 2. Then run the sysadmsh
program as follows:
1 Select Printers.
2 Select Configure.
3 Select Add.
4 Enter the name of the print queue you entered in the /etc/
printcap file as the Printer name.
5 Enter anything as the Comment, and Class name.
6 For the Use printer interface select Existing.
7 Press the F3 key to get a list of available interfaces, and select
the desired one as the Name of interface using the cursor keys
(
Dumb is a good choice).
8 Select Direct as the Connection.
9 Enter the desired Device name ( /dev/lp generally works).
10 Select Hardwired as the Device.
11 Select No for the Require banner field.
Older SCO UNIX ® Systems
The Brother print servers support the FTP protocol. Earlier SCO
UNIX
® systems are often configured to print using the FTP protocol.
IBM AS/400
To use a Brother print server with an IBM AS/400 running IBM's TCP/
IP gateways services for OS/400 (the OS/400 system must be v3.1
or later)
Use the CFGTCP command at your OS/400 prompt to add the print
server's TCP/IP address to the AS/400 host table.