Brother MFC-J6920DW - Manual (Page 69)

PhotoCapture Center™: Printing photos from a memory card or USB Flash drive
63
8
g
Swipe up or down, or press a or b to
display 2x2inch, 25x36mm, 35x45mm,
36x51mm, 45x45mm, 45x55mm,
35x48mm or 50x70mm (2x2.75inch),
and then press the option you want to
set as the photo size.
NOTE
The machine automatically crops the
photo according to the size you choose.
You cannot trim the photo further.
h
Confirm the image displayed on the
Touchscreen.
Rotate the image if necessary by
pressing .
i
Press OK.
j
Do one of the following:
 Press Print Settings to change
the print settings. Go to step k.
 If you do not want to change any
settings, press Start to print.
k
Do one of the following:
 To change the print quality, press
Print Quality.
Press Normal or Photo.
 To change the paper type, press
Paper Type.
Press Plain Paper,
Inkjet Paper, Brother BP71 or
Other Glossy that you want to set.
 To change the paper size, press
Paper Size.
Press 4"x6", 5"x7", Letter or A4
that you want to set.
 To add enhancement effects, press
Photo Enhance.
Press Auto Correct,
Remove Red-Eye,
Auto Correct & Remove Red-Eye
or Off that you want to set.
l
When you are finished changing the
settings press OK.
m
Press Start.
Slide Show
8
You can view all your photos on the
Touchscreen using Slide Show. You can
also choose a photo during the operation.
a
Open the media slot cover.
b
Put the memory card or USB Flash drive
in the correct slot.
c
Press Photo.
d
Swipe left or right to display
Slide Show.
e
Press Slide Show.
Press OK.
f
Do one of the following:
 If you want to change the length of
time the Touchscreen shows each
photo, press
Show Each Photo for.
Swipe up or down, or press a or b to
display 3Secs, 10Secs, 30Secs,
1Min or 5Mins, and then press the
option you want to set.
 If you want to change the effect,
press Effect.
Press Slide In, Fade In,
Zoom In or Off.
 If you do not want to change the
settings, press Start.
g
Press to finish Slide Show.