Brother MFC-J6920DW - Manual (Page 90)

84
Checking the ink volume
A
Although an ink volume icon appears on the
Touchscreen, you can use the ink menu to
see a large graph showing the ink that is left
in each cartridge.
a
Press .
NOTE
You can also press and Ink.
b
Press Ink Volume.
The Touchscreen shows the ink volume.
NOTE
When the ink cartridge is near the end of
its life or having a problem, one of the
following icons is displayed.
c
Press .
NOTE
You can check the ink volume from your
computer.
For more information, see Software and
Network User’s Guide: Monitor the Ink
Level and Status of the Machine from
Your Computer (Windows
®
) or Monitor
Machine Status from Your Computer
(Macintosh).
Packing and shipping
the machine
A
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
correctly, any damage that may occur in
transit may not be covered by your warranty.
The machine should be adequately insured
with the carrier.
IMPORTANT
It is important to allow the machine to
“park” the print head after a print job.
Listen carefully to the machine before
unplugging it to make sure that all
mechanical noises have stopped and the
print head is in the right corner as shown
in the illustration. Not allowing the
machine to finish this parking process may
lead to print problems and possible
damage to the print head.
a
Unplug the machine from the AC power
outlet.
b
Using both hands, use the finger holds
on each side of the machine to lift the
scanner cover into the open position.
Then unplug the machine from the
telephone wall jack and take the
telephone line cord out of the machine.
c
Unplug the interface cable from the
machine, if it is connected.
The ink level is low.
The ink cartridge is empty.
There is a problem with the ink
cartridge.