Brother MFC-J870DW - Manual (Page 11)

5
2
2
TX Lock
(MFC-J650DW)
2
TX Lock lets you prevent unauthorized
access to the machine. You will not be able to
continue to schedule Delayed Faxes or
Polling jobs. However, any pre-scheduled
Delayed Faxes will still be sent even if you
turn on TX Lock, so they will not be lost.
While TX Lock is On, the following operations
are available:
 Receiving faxes
 Fax Forwarding
(If Fax Forwarding was already On)
 Paging
(If Paging was already On)
 Remote Retrieval
(If Fax Storage was already On)
 PC-Fax Receive
1
(If PC-Fax Receive was already On)
1 While the TX Lock feature is turned on, your machine
will receive faxes and store them in its memory.
Then, when TX Lock is turned off, the faxes will be
sent to your chosen PC.
While TX Lock is On, the following operations
are NOT available:
 Operation from the control panel
 PC printing
NOTE
If you forget the TX Lock password, call
Brother Customer Service. (See Basic
User’s Guide: Brother numbers.)
Setting and changing the
TX Lock password
2
NOTE
If you have already set the password, you
will not need to set it again.
Setting the password
2
Make a careful note of your password.
a
Press (Settings).
b
Press All Settings.
c
Press a or b to display Fax.
d
Press Fax.
e
Press a or b to display
Miscellaneous.
f
Press Miscellaneous.
g
Press TX Lock.
h
Enter a 4-digit number for the password
using the keyboard on the Touchscreen.
Press OK.
i
When the Touchscreen shows Verify,
re-enter the password using the
keyboard on the Touchscreen.
Press OK.
j
Press .
Security features
2