Brother MFC-J870DW - Manual (Page 71)

PhotoCapture Center™: Printing photos from a memory card or USB Flash drive
65
8
Color Enhancement
8
You can turn on the color enhancement
feature to print more vivid images. Printing
time will be slower.
a
Open the media slot cover.
b
Put the memory card or USB Flash drive
in the correct slot.
c
Press Photo.
d
Press d or c to display View Photos.
e
Press View Photos.
f
Press d or c to display each photo.
When the photo you want is displayed,
press it, and then press OK.
g
Press OK.
h
Press Print Settings.
i
Press a or b to display
Color Enhance.
j
Press Color Enhance.
k
Do one of the following:
 If you want to customize the
White Balance, Sharpness or
Color Density, press
Color Enhance, and then press
On.
Go to step l.
 If you do not want to customize,
press Color Enhance, and then
press Off.
Press
.
Go to step o.
l
Press a or b to display
White Balance, Sharpness or
Color Density, and then press the
option you want.
m
Press d or c to adjust the degree of the
setting.
Press OK.
n
Do one of the following:
 If you want to customize another
color enhancement, repeat steps l
and m.
Press
.
 If you want to change other settings,
press
to display the print setting
menu and press the setting you want
to change. (See PhotoCapture
Center™ print settings on page 61.)
o
If you do not want to change additional
settings, press or OK.
Press Start to print.
NOTE
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will affect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other color. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Color Density
This setting adjusts the total amount of
color in the image. You can increase or
decrease the amount of color in an image
to improve a washed out or weak picture.