Brother MFC-J870DW - Manual (Page 72)

Chapter 8
66
Cropping
8
If your photo is too long or too wide to fit the
available space on your chosen layout, part
of the image will be cropped.
The factory setting is On. If you want to print
the whole image, change this setting to Off.
If you set Cropping to Off, also set
Borderless to Off. (See Borderless
printing on page 66.)
a
Open the media slot cover.
b
Put the memory card or USB Flash drive
in the correct slot.
c
Press Photo.
d
Press d or c to display View Photos.
e
Press View Photos.
f
Press d or c to display each photo.
When the photo you want is displayed,
press it, and then press OK.
g
Press OK.
h
Press Print Settings.
i
Press a or b to display Cropping.
j
Press Cropping.
k
Press Off (or On).
l
If you do not want to change additional
settings, press or OK.
Press Start to print.
Cropping: On
8
Cropping: Off
8
Borderless printing
8
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a
Open the media slot cover.
b
Put the memory card or USB Flash drive
in the correct slot.
c
Press Photo.
d
Press d or c to display View Photos.
e
Press View Photos.
f
Press d or c to display each photo.
When the photo you want is displayed,
press it, and then press OK.
g
Press OK.
h
Press Print Settings.
i
Press a or b to display Borderless.
j
Press Borderless.
k
Press Off (or On).
l
If you do not want to change additional
settings, press or OK.
Press Start to print.