Brother MFC 9970CDW - Manual (Page 26)

Configuring your machine for a wireless network (For MFC-9560CDW and MFC-9970CDW)
21
3
For Touchscreen models
3
a Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
1 TKIP is supported for WPA-PSK only.
For example:
3
Note
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
b
Press MENU.
c
Press Network.
d
Press WLAN.
e
Press Setup Wizard.
f When WLAN Enable? is displayed, press On to accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
g
The machine will search for your network and display a list of available SSIDs. Choose <New SSID>
using a or b.
Network name: (SSID, ESSID)
Communication Mode Authentication method Encryption mode Network key
Infrastructure Open system NONE
WEP
—
Shared key WEP
WPA/WPA2-PSK AES
TKIP 1
Ad-hoc Open system NONE
WEP
—
Network name: (SSID, ESSID)
HELLO
Communication Mode Authentication method Encryption mode Network key
Infrastructure WPA2-PSK AES 12345678