Brother MFC 9970CDW - Manual (Page 91)

Web Based Management
86
6
 Kerberos Server Address
1 For DCP-9270CDN and MFC-9970CDW
Note
Scan to Network is available when Network server profiles are configured using Web Based Management.
Changing the LDAP configuration using a web browser
(For DCP-9270CDN and MFC-9970CDW)
6
You can configure and change the LDAP settings using a web browser. Click Network Configuration on the
MFC-XXXX or DCP-XXXX web page, and then click Configure Protocol. Make sure that the check box for
LDAP is on and then click Advanced Settings.
 Status Enable/Disable
 LDAP Server Address
 Port (The default port number is 389.)
 Timeout for LDAP
 Authentication
 Username
 Password
 Kerberos Server Address
 Search Root
 Attribute of Name (Search Key)
 Attribute of E-mail
 Attribute of Fax Number
After setting, make sure that the Status is OK on the Test Result page.
Note
• If the LDAP server supports Kerberos Authentication, we recommend to choose Kerberos for the
Authentication setting. It provides strong authentication between the LDAP server and your machine.
You must configure the SNTP protocol (network time server), or you must set the date, time and time zone
correctly on the control panel for Kerberos Authentication. (For information about setting SNTP, see
Synchronize with SNTP server on page 77. For information about setting the date, time and time zone,
see the Quick Setup Guide.)
• For the details of each item, see the Help Text in the Web Based Management.