Brother MFC 9970CDW - Manual (Page 57)

Control panel setup
52
5
Printing the Network Configuration List
5
Note
Node name: The Node name appears on the Network Configuration List. The default node name is
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address.)
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
a
Press Menu.
b (For MFC models) Press a or b to choose Print Reports.
(For DCP models) Press a or b to choose Machine Info..
Press OK.
c
Press a or b to choose Network Config.
Press OK.
d
(For US) Press Black Start or Color Start.
(For UK) Press Mono Start or Colour Start.
For Touchscreen models
a Press MENU.
b Press a or b to display Print Reports and then press Print Reports.
c Press Network Config.
d (For US) Press Black Start or Color Start.
(For UK) Press Mono Start or Colour Start.
Note
If the IP Address on the Network Configuration List shows 0.0.0.0, wait for one minute and try again.