Brother MFC-J245 - Manual (Page 54)

Chapter 8
42
Copy options
8
When you want to quickly change the copy
settings temporarily for the next copy, use the
Copy Options key.
The machine returns to its default settings
one minute after it finishes copying, or if the
mode timer returns the machine to FAX
mode.
(See Advanced User’s Guide: Mode Timer.)
(Basic User’s Guide)
For information about changing the following
copy settings, see page 42.
 Paper Type
 Paper Size
(Advanced User’s Guide)
For information about changing the following
copy settings, see Advanced User’s Guide:
Copy options.
 Quality
 Enlarge/Reduce
 Page Layout
 2in1(ID)
 Stack/Sort
 Density
 Remove Bkg. Clr
NOTE
If you want to sort copies, use the ADF.
Paper Type
8
To get the best print quality if you are copying
on special paper, set the machine for the type
of paper you are using.
a
Load your document.
b
Press (COPY).
c
Enter the number of copies you want.
d
Press Copy Options and a or b to
choose Paper Type.
Press OK.
e
Press a or b to choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency.
Press OK.
f
If you do not want to change any other
settings, press Black Start or
Color Start.
Paper Size
8
If you are copying on paper other than Letter
size, you must change the Paper Size setting.
You can copy only on Letter, Legal, A4, A5,
Executive or Photo (4"
 6")/(10  15 cm)
paper.
a
Load your document.
b
Press (COPY).
c
Enter the number of copies you want.
d
Press Copy Options and a or b to
choose Paper Size.
Press OK.
e
Press a or b to choose Letter, Legal,
A4, A5, Executive or 4"(W)x6"(H).
Press OK.
f
If you do not want to change any other
settings, press Black Start or
Color Start.