Brother MFC-J245 - Manual (Page 67)

Routine maintenance
55
A
Cleaning the print head
A
To maintain good print quality, the machine
will automatically clean the print head when
needed. You can start the cleaning process
manually if there is a print quality problem.
Clean the print head if you get a horizontal
line in the text or graphics, or blank spots
where text should appear on your printed
pages. You can clean Black only; Yellow,
Cyan, and Magenta together; or all four
colors at once.
Cleaning the print head consumes ink.
Cleaning too often uses ink unnecessarily.
IMPORTANT
DO NOT touch the print head. Touching
the print head may cause permanent
damage and may void the print head's
warranty.
a
Press Menu, 1, 2.
b
Press a or b to choose Black, Color or
All.
Press OK.
The machine cleans the print head.
When cleaning is finished, the machine
will go back to FAX mode.
NOTE
• If you clean the print head at least five
times and the print has not improved, try
installing a new Genuine Brother Brand
replacement ink cartridge for each
problem color. Try cleaning the print head
again up to five more times. If the print has
not improved, call Brother Customer
Service. (See Brother numbers
on page i.)
• You can also clean the print head from
your PC.
For more information, see Software and
Network User’s Guide: Clean the Print
Head (Windows
®
) or Clean the Print Head
(Macintosh).
Checking the print quality
A
If faded or streaked colors and text appear on
your printouts, some of the print head nozzles
may be clogged. You can check this by
printing the Print Quality Check Sheet and
looking at the nozzle check pattern.
a
Press Menu, 1, 1.
b
Press a or b to choose
Print Quality.
Press OK.
c
Press Color Start.
The machine starts printing the Print
Quality Check Sheet.
d
Check the quality of the four color blocks
on the sheet.
e
The LCD asks you if the print quality is
OK.
Do one of the following:
 If all lines are clear and visible, press
1 (Yes) to finish the Print Quality
check and go to step i.
 If lines are missing, as shown below,
press 2 to choose No.
f
The LCD asks you if the print quality is
OK for black and then for the three
colors.
Press 1 (Yes) or 2 (No).
g
The LCD asks you if you want to start
cleaning.
Press 1 (Yes).
The machine starts cleaning the print
head.
OK Poor