Brother MFC-J245 - Manual (Page 69)

Routine maintenance
57
A
NOTE
Setting the date and
time
A
The LCD displays the date and time. If it is not
current, follow these instructions to re-enter it.
You can add the date and time to each fax
you send by setting your Station ID.
a
Press Menu, 0, 1, 1.
b
Enter the last two digits of the year using
the dial pad, and then press OK.
c
Enter the two digits for the month using
the dial pad, and then press OK.
d
Enter the two digits for the day using the
dial pad, and then press OK.
e
Press a or b to choose 12h Clock or
24h Clock, and then press OK.
f
To enter the time, do one of the
following:
 If you chose 12h Clock in step e,
enter the time (in 12-hour format)
using the dial pad, and then press
OK.
Press a or b to choose AM or PM, and
then press OK.
 If you chose 24h Clock in step e,
enter the time (in 24-hour format)
using the dial pad, and then press
OK
(For example, enter 19:45 for 7:45
PM.)
g
Press Stop/Exit.
i
When the print
alignment is not
adjusted properly,
text looks blurry
like this. After the print
alignment is
adjusted properly,
text looks like this.