Brother MFC-9420CN - Manual (Page 125)

ControlCenter2 (For Mac OS ® X 10.2.4 or greater)
9 - 4
9
SCAN
This section contains four buttons for Scan to Image, Scan
to OCR, Scan to E-mail and Scan to File applications.
These four selections can be accessed from ControlCenter2
or from the Scan key on the control panel of the machine. The
Target Application, File Type and scan settings are
configured independently by choosing the Software Button
or Device Button tabs of the ControlCenter2 Configuration
window.
Image (example: Apple PreView)
Scan to Image feature allows you to scan an image directly
into your graphics application for image editing. To change
the default settings, click on the button while holding down the
Ctrl key and select Software Button or Device Button.
If you want to scan and then crop a portion of a page after
pre-scanning the document, check Show Scanner Interface
box.
Change the other settings, if needed.
To change the destination application, select the appropriate
application from the Target Application pull down list. You
can add an application to the lists by clicking the Add button.
Enter the Application Name (up to 30 characters) and select
your preferable application by clicking the Browse button.
Also choose the File Type from the pull-down list.