Calibration, Calibration -6 – Brother MFC-9420CN User Manual
Page 14
Advertising
Printing
1 - 6
1
Calibration
The output density for each color may vary depending on the environment the machine is in such as
temperature and humidity. Calibration helps you to improve the color density.
1
Press Menu/Set, 4, 4.
2
Press
▲
or
▼
to select
Calibrate
.
3
Press Menu/Set.
4
Press 1 to select
Yes
.
You can reset the calibration parameters back to those set at the factory.
1
Press Menu/Set, 4, 4.
2
Press
▲
or
▼
to select
Reset
.
3
Press Menu/Set.
4
Press 1 to select
Yes
.
Note
If an error message is displayed, press Stop/Exit and try again. For more information, see Troubleshooting
and routine maintenance in the User’s Guide.
Advertising