Brother MFC-3200C - Manual (Page 177)

H O W T O S C A N U S I N G W I N D O W S ® 17 - 2
MFC3200C-US-FM6.0
Scanning a whole page
1
Place the original face down in the ADF (Automatic Document Feeder).
2
Adjust the following settings, if required, in the Scanner window:
• Resolution
• Scan Type (Black & White, Gray [Error Diffusion], True Gray, 256 Color
or 24-bit color)
• Brightness
• Contrast
• Size
3
Click the Start button in the scanner window.
When scanning is completed, click Cancel to return to the PaperPort ® window.
PreScanning to crop a portion you want to scan
The Pre-Scan button is used to preview an image for cropping any unwanted
areas from the image. When you are satisfied with the preview, click the Start
button in the scanner window to scan the image.
How to Use PreScan to Adjust an Image:
1 Place the original face down in the ADF.
2 In the Twain-32 Brother MFLPro Color Setup dialog box, click the PreScan
button.
The entire original will be scanned into the PC and will appear in the Scanning
Area.
3
To crop a portion of the original to be scanned, drag any side or corner of the
dotted outline in the Scanning Area with the left mouse button. Adjust the dotted
outline until it surrounds only the portion of the original you wish to scan.
Cropped Image PreScanned Image