Brother MFC-3200C - Manual (Page 85)

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S 8 - 1
8
MFC3200C-US-FM6.0
8
Auto Dial Numbers
and Dialing Options
Storing Numbers for Easy Dialing
You can set up your MFC to do three types of easy dialing: One Touch, Speed
Dial and Groups for Broadcasting faxes.
Storing One Touch Dial Numbers
You can store 8 fax/telephone numbers that
you can dial by pressing one key (and
Black Fax Start ). To access numbers 5 to
8, hold down Shift . When you press a One
Touch dial location, the LCD shows the
name or number as the call is dialed.
(See
One Touch Dialing , page 8-5.)
One Touch keys are the 4 keys (numbers 5 to 8) located to the left of the dial pad.
1 Press Menu/Set , 2 , 3 , 1 .
2 Press the One Touch key where you want to store a number.
The LCD shows the location you selected.
3 Enter a number (up to 20 digits), and then press Menu/Set . If you want to enter
a pause in the dialing sequence (for example, to wait for an “outside line”), press
Redial/Pause as you’re entering digits. A dash appears on the LCD. Pressing
Redial/Pause enters a 3.5 second pause when the number is dialed.
4 Use the dial pad to then enter the name
(up to 15 characters), and then press
Menu/Set . You can use the chart on
page 5-3 to help you enter letters— OR —To store the number without a name,
press Menu/Set .
5 Return to Step 2 to store another One Touch number— OR —Press Stop/Exit .
When you dial an auto dial number, the LCD shows the name you’ve stored, or,
if you haven’t stored a name, the number you’ve stored.
If you loose electrical power, auto dial numbers in memory will not be lost.
(For USA only) For your convenience, One Touch key 1 is pre-programmed
for the Brother fax back system. You can change it by storing your own auto
dial number in its place. (Please see
Changing One Touch and Speed Dial
Numbers , page 8-2.)
1 . O N E - T O U C H D I A L
N A M E :