2) selecting a source, ᕢ selecting a source, Projecting an image (basic operation) – Acoustic Energy LT35 User Manual
Page 27: Selecting the computer or video source, Selecting a source from the source list, Detecting the signal automatically, Using the remote control
19
3. Projecting an Image (Basic Operation)
ᕢ Selecting a Source
Selecting the computer or video source
LAMP
STATUS
POWER
SOURCE
AUTO ADJ.
FOCUS
ON/STAND BY
SELECT
LAMP MODE
VOLUME
S-VIDEO
VIDEO
L-CLICK
MOUSE
R-CLICK
AUTO ADJ.
COMPUTER
ASPECT
HELP
FREEZE
PICTURE
NOTE: Turn on the computer or VCR connected to the projector.
Selecting a source from the Source list
Press and quickly release the SOURCE button on the projector cabinet
to display the Source list. Each time the SOURCE button is pressed,
each source name will be highlighted in sequence.
Press the ENTER button or allow 2 seconds to elapse.
The selected signal will be displayed.
Detecting the Signal Automatically
Press and hold the SOURCE button for a minimum of 2 seconds, the
projector will search for the next available input source.
Using the Remote Control
Press any one of the VIDEO, S-VIDEO and COMPUTER buttons.