Acoustic Energy LT35 - Manual (Page 36)

28
4. Convenient Features
³ Turning off the Image and Sound
Press the PIC-MUTE button to turn off the image and sound for a short
period of time. Press again to restore the image and sound.
ENTER EXIT
MENU
UP
PAGE
OFF
POWER
ON
PIC-MUTE
DOWN
FOCUS
· Freezing a Picture
Press the FREEZE button to freeze a picture. Press again to resume
motion.
ᕣ Changing Lamp Mode
LAMP MODE
VOLUME
S-VIDEO
VIDEO
L-CLICK
MOUSE
R-CLICK
AUTO ADJ. COMPUTER
ASPECT HELP
FREEZE PICTURE
The lamp life can be extended by using the Eco mode.
To change to the “Eco” mode, do the following:
1. Press the LAMP MODE button to display [Lamp Mode] screen.
2. Use the SELECT
̆
or
̄
button to select [Eco] mode.
3. Press the ENTER button. Or press the SELECT ̈ button to select
[OK] and press the ENTER button.
To cancel it, select [Cancel] and press the ENTER button.
To change from [Eco] to [Normal], Go back to Step 2 and select [Nor-
mal]. Repeat Step 3.
Normal Mode ........ This is the default setting (100% Brightness).
Eco Mode .............. Select this mode to increase the lamp life and reduce fan
noise (LT35: 77% Brightness, LT30/LT25: 85% Bright-
ness).
LAMP MODE
VOLUME
S-VIDEO
ASPECT HELP
FREEZE PICTURE
ᕤ Preventing the Unauthorized Use of the Projector
A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword
is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the
projector cannot project an image.
To enable the Security function:
1. Press the MENU button.
The menu will be displayed.
2. Use SELECT
̆
or
̄
button to select [Setup - Installation]
→
[Security] and press the ENTER button.
The Off/On menu will be displayed.