Acoustic Energy LT35 - Manual (Page 32)

24
3. Projecting an Image (Basic Operation)
ᕤ Adjusting Focus Manually
Adjust the focus manually in the following cases:
• When adjusting the focus out of the effective range of the automatic focus
• When finely adjusting the focus
• When the menu setting for [Auto Focus] is turned off
Adjusting with buttons on the cabinet
LAMP
STATUS
POWER
SOURCE AUTO ADJ. FOCUS ON/STAND BY
SELECT
1. Press the FOCUS button quickly.
The focus adjustment screen will be displayed.
The focus adjustment screen will be closed if no button operation is
made for 5 seconds.
LAMP
STATUS
POWER
SOURCE AUTO ADJ. FOCUS ON/STAND BY
SELECT
TIP: If the projector is placed within the effective focus range, pressing
and holding the FOCUS for a minimum of 2 seconds starts the Auto
Focus function.
2. Press the SELECT
̇
or
̈
button to adjust the focus.
3. Press the EXIT button.
The focus adjustment screen will be closed.
Adjusting with the remote control
ENTER EXIT
MENU
UP
PAGE
OFF
POWER
ON
PIC-MUTE
DOWN
FOCUS
1. Press the FOCUS + or - button.
The focus adjustment screen will be displayed.
2. Press the EXIT button.
The focus adjustment screen will be closed.
• The focus adjustment screen will be closed if no button operation
is made for 5 seconds.
• Use the FOCUS + or - button to adjust the focus.