Inserting the battery pack and memory card, Be sure that the waterproof seals – Canon PowerShot D30 User Manual
Page 14
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
14
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
•
For details on charging time and the number of shots and recording time
possible with a fully charged battery pack, see “Number of Shots/Recording
Time, Playback Time” (
•
Charged battery packs gradually lose their charge, even when they are not
used. Charge the battery pack on (or immediately before) the day of use.
•
The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For
power outlets in a different format, use a commercially available adapter for
the plug. Never use an electrical transformer designed for traveling, which may
damage the battery pack.
Inserting the Battery Pack and Memory Card
Insert the included battery pack and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted
in another device), you should format the memory card with this camera
(
).
1
Open the cover.
z
z
Slide the lock ( ) and open the cover
( ).
2
Insert the battery pack.
z
z
While pressing the battery lock in the
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
z
z
If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confirm that the
battery pack is facing the right way and
locks when inserted.
z
z
Be careful not to damage the waterproof
seal when inserting the battery pack.
3
Check the card’s write-protect
tab and insert the memory card.
z
z
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
z
z
Insert the memory card facing as shown
until it clicks into the locked position.
z
z
Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
z
z
Be careful not to damage the waterproof
seal when inserting the memory card.
Waterproof
Seal
Terminals
Battery
Lock
Label