Canon PowerShot D30 - Manual (Page 42)

Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
42
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Still Images
Deactivating the Flash
Prepare the camera for shooting without the flash as follows.
z z
Press the <
r> button, press the <q><r>
buttons to choose [
!], and then press
the <
m> button.
z z
Once the setting is complete, [
!] is
displayed.
z z
To restore the original setting, repeat this
process but choose [
].
•
If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct (
=
15 ).
1 Configure the setting.
z z
Press the <
n> button, choose [Date
Stamp] on the [
4] tab, and then choose
the desired option (
=
26 ).
z z
Once the setting is complete, [DATE] is
displayed.
2
Shoot.
z z
As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
z z
To restore the original setting, choose
[Off] in step 1.
•
Date stamps cannot be edited or removed.