Canon PowerShot D30 - Manual (Page 32)

Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
32
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
•
Removing the battery pack after step 3 will deactivate the logger. To
reactivate the logger after battery replacement, turn the camera on
and then off again.
• Saving GPS log files is not possible when the memory card write-
protect tab is in the locked position. Make sure the tab is set to the
unlocked side.
•
Location information, date and time will be saved to the memory
card when the camera is turned off or when displaying log files
(
=
32 ). For this reason, if the camera is off and you want to
remove the memory card when the logger is being used, turn the
camera on, then turn it off again before removing the memory card.
• When using the logger function, exercise caution when turning the
camera over to another person, as the date and time, and logged
location information will remain on the camera until it is saved to a
memory card (even if the battery pack runs out of power).
• Be careful when formatting memory cards ( = 106 ), because the
GPS log file will also be erased.
• You can also configure logger settings in n ( =
109 ).
Checking the GPS Log Files
You can check the GPS log files saved to a memory card on the camera.
1
Access the [GPS Settings]
screen.
z z
Press the <
n> button, choose [GPS
Settings] on the [
3] tab, and then press
the <
m> button ( =
26 ).
2
Access the [Display Log Files]
screen.
z z
Choose [Display Log Files], and then
press the <
m> button ( =
26 ).