Canon VIXIA HF R42 - Manual (Page 109)

External Connections
Š 109
* When you select [Select], perform the following procedure to select the individ-
ual photos you want to copy before touching [Yes].
** Touch [Stop] to interrupt the operation while it is in progress.
To select individual photos
1 Touch the individual photos you want to copy.
• A checkmark ! will appear on the photos you touch. The total
number of selected photos will appear next to the " icon.
• Touch a selected photo to remove the checkmark. To remove all
checkmarks at once, touch [Remove All] > [Yes].
2 After selecting all the desired photos, touch [OK].
Options
* The last four digits of the folder name indicate the date the folder was created.
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not press
.
NOTES
• In the following cases, you will not be able to copy recordings to the
memory card:
- If the memory card slot cover is open.
- If the LOCK switch on the memory card is set to prevent writing.
- If the file numbering is at maximum (A 152).
- If there is no memory card in the memory card slot.
[folder name] Copy all the photos taken on a particular date. The
folder name* (A 152) will appear in the control button.
[Select] Select individual photos to copy.
[All Photos] Copy all the photos.
COP
Y