Canon VIXIA HF R42 - Manual (Page 116)

116 Š
External Connections
(PTP) allowing you to transfer photos (JPEG only) simply by connecting
the camcorder to a computer using the supplied USB cable, without
having to install the supplied software ImageBrowser EX.
6/4 Memory Save: Saving an Entire Memory onto an
External Hard Drive
You can easily save all the movies and photos you recorded onto a
commercially available external hard drive connected directly to the
camcorder*. You can also use the camcorder to play back your record-
ings directly from the hard drive. Initialize the hard drive (A 118) when
you use it with this camcorder for the first time.
* If the USB cable supplied with the external hard drive has a standard-A connector,
you will need to use the optional UA-100 USB Adapter.
Operating modes:
Saving a Memory onto an External Hard Drive
1 Power the camcorder using the compact power adapter.
2 Press to set the camcorder to playback mode.
3 Connect the camcorder to the external hard drive using the
optional UA-100 USB Adapter.
Connection #-2. Refer to
Connection Diagrams (A 104).
4 Save the entire contents of the desired memory.
* Touch [Stop] > [Yes] > [OK] to interrupt the operation while it is in progress.
• After selecting the memory, you can check the name of the folder
that will be created on the hard drive. Every memory save operation
will create a separate memory save folder with the date (in numerical
form) used as the folder name; up to 10 memory save folders can be
created for any given date and up to 300 memory save folders can
be saved on a single hard drive.
SCN
[Save to Hard Drive] > Desired memory > [Yes]*
> [OK]
COP
Y