Canon VIXIA HF R42 - Manual (Page 95)

Advanced Playback and Editing
Š 95
2 Select the scene you want to play back.
Drag your finger left/right to bring the desired scene to the front.
3 Touch the scene’s thumbnail to start the playback.
• The camcorder will play back the scene selected and continue until
the end of the last scene in the index screen.
• Playback controls are the same as when playing back scenes from
the [y Movie Playback] index screen (A 50).
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
Playback with Background Music
You can play back movies (or a photo slideshow) using one of the sup-
plied music tracks as background music.
Operating modes:
The supplied VIXIA CD-ROM contains 3 music tracks you can use as
background music. 6/4: The music files come pre-installed in
the built-in memory.
You can mix the original audio and the background music and adjust
the background music mix balance to your preference.
POINTS TO CHECK
• To play back scenes or a slideshow of photos recorded on the memory
card, you will need to transfer the music tracks to the memory card in
advance. See the NOTES section (A 97).
1 Open the desired index screen (A 50, 93, 94).
SCN
COP
Y