Image stabilizer, Install-free vb-c60 viewer, Upload, e-mail notification – Canon VB-C60 User Manual

Page 21: Panorama image creation, Two-way audio (full duplex)

Advertising
background image

1-3

Features of VB-C60

1

1

Bef

o

re U

s

e

Image Stabilizer

This function compensates for shaking of image due to vibration when the camera is installed

on the ceiling, on a pole, etc. See "Camera Control" ( Operation Guide).

* It does not work against significant vibration exceeding a certain level or momentary vibration. When

Image Stabilizer is used, the image quality drops and the viewing angle becomes smaller.

Install-Free VB-C60 Viewer

This camera has a built-in VB-C60 Viewer, so its data can be viewed using a browser.

Accordingly, there is no need to install a PC application. Also, three levels of user privileges

can be set, including [Administrator], [Authorized Users] and [Guest Users].

Selectable Metering Modes for Various Shooting Conditions

Images can be captured by switching the metering mode* to one of three options, including

[Center-weighted], [Average] and [Spot], according to the shooting condition of the camera.

See "Setting Exposure" ( Operation Guide).

* Brightness (light quantity) of the subject is measured to adjust the exposure.

Upload and Sound Playback by Motion Detection Function

Change in video caused by movement of the subject is detected to upload the image and

play sound.

Upload, E-mail Notification

Events generated by the motion detection function or an external input device are used as

triggers to upload images temporarily recorded in the camera to the specified location via

FTP/HTTP/SMTP (e-mail), or for a notification to be sent via HTTP/SMTP (e-mail).

Panorama Image Creation

The entire shooting range of the camera can be captured as a panorama image, which can

then be registered in the camera and displayed on the viewer for visual camera control,

preset setting, etc.

Two-Way Audio (Full Duplex)

A microphone or speaker with amplifier can be connected*

1

to the camera to transmit/receive

audio (full duplex) via the viewer*

2

. You can select a desired audio input mode from LINE IN

and MIC IN by switching the setting on the Setting Page ( P. 3-7).

*1 Microphones and amplifiers are sold separately.

*2 RM-Lite Viewer is the only viewer that supports two-way audio communication.

VB-C60 Viewer only supports audio reception.

Advertising