Check the video captured by the camera, Check the video captured by the camera -13 – Canon VB-C60 User Manual
Page 55
2-13
Step 3 Perform Initial Setting of the Camera
Init
ial S
e
tting and
Ins
ta
llati
o
n
of Cam
e
ra
Check the Video Captured by the Camera
When the initial settings are complete, check camera images using VB-C60 Viewer. At this time,
set the network options on the PC according to the IP address and subnet mask set in the
camera.
1.
Click the MAC address of the camera whose operation you want to check, and then click
[Settings].
2.
The web browser starts and the top page of the camera is displayed. Click [VB Viewer] of
[VB-C60 Viewer].
Note
There may be cautionary information that should be heeded depending on your operating
environment. See "Notes on Operating Environment" ( P. 1-13) before you perform initial
setting.
To open the Setting Page using the [Detailed Settings] button, do not change the HTTP port
of the camera from 80. For information on setting the HTTP port number, see "HTTP Server"
in Operation Guide.
Click to select.