Canon VB-C60 - Manual (Page 67)

2-25
Step 4 Install the Camera
Init
ial S
e
tting and
Ins
ta
llati
o
n
of Cam
e
ra
10. Install one screw to prevent the dome from turning.
11. When the installation is complete, reboot the camera to initialize the camera position. See
"Rebooting" ( Operation Guide).
This completes the installation.
Tip
If the LED is on, light may reflect on the dome and enter the image. In this case, set the LED
setting to [Turn Off] See "LED Setting" ( Operation Guide).