Removing the roll holder from rolls – Canon imagePROGRAF iPF8400S User Manual
Page 519
Advertising
8
Lower the Ejection Guide and close the Top Cover.
Note
•
To load new paper in the printer at this point, see "Loading Rolls in the Printer."
•
Clean inside the top cover before loading paper.
(See "Cleaning Inside the Top Cover.")
Removing the Roll Holder from Rolls
Removing the Roll Holder from Rolls
1
Lift the Holder Stopper lever (a) from the shaft side to un-
lock it. Holding the Holder Stopper at the position indica-
ted (b), remove it from the Roll Holder.
2
Remove the Roll Holder from the roll.
iPF8400S
Removing the Roll Holder from Rolls
Handling and Use of Paper
Handling rolls
519
Advertising