Canon imagePROGRAF iPF8400S - Manual (Page 920)

Frequently Asked Questions Frequently Asked Questions
Frequently Asked Questions Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed explanations, click the hyper-
links in the answer column.
Question Answer
I want to easily create
vertical or horizontal ban-
ners. You can print originals that are in landscape (or portrait) orientation automatically enlarged to fit the roll width. This
is an easy way to create vertical or horizontal banners.
(See "Printing Vertical or Horizontal Banners (Large-Format Printing).")
➔ P.98
Does this printer support
sub-ink tank system? This printer supports sub-ink tank system.
Even if an ink tank becomes empty during printing, since a certain amount of ink always is stored in a sub-ink tank,
you can replace the ink tank while printing.
(See "Replacing Ink Tanks.")
➔ P.872
I want to know how to
configure roll cutting. You can select the cutting method by the setting of the printer driver and the setting of the printer.
To cut rolls automatically after printing, set Cutting Mode of the printer to Automatic and Automatic Cutting of
the printer driver to Yes.
When using paper for which ink adhesion takes time or the print surface is easily scratched, we recommend that
you set the Cutting Mode setting of the printer to Eject.
(See "Specifying the Cutting Method for Rolls.")
➔ P.523
(See "Cutting Roll Paper After Printing.") ➔ P.155
I want to configure so
that the roll is cut auto-
matically after waiting for
the ink to dry. In the printer driver, you can set the time for waiting until the ink dries.
Also, you can set likewise on the printer.
(See "Specifying the Ink Drying Time for Rolls.")
➔ P.522
(See "Menu Structure.") ➔ P.635
How do I print without
borders? When printing on rolls, you can perform borderless printing by configuring the printer driver. (when printing on cut
sheets, you cannot perform borderless printing)
(See "Borderless Printing on Paper of Equivalent Size.")
➔ P.88
(See "Borderless Printing by Resizing Originals to Fit the Roll Width.") ➔ P.92
(See "Borderless Printing at Actual Size.") ➔ P.81
I want to know the paper
types that can be used in
this printer. Concerning the paper that can be used in this printer, refer to the imagePROGRAF home page or the Paper Refer-
ence Guide.
(See "Displaying the Paper Reference Guide.")
➔ P.501
The paper type that I
want to print is not dis-
played on the Display
Screen. When using newly released paper, paper information must be registered on the printer and the printer driver.
Download the new version of Media Information File from the imagePROGRAF website and install it.
(See "Updating paper information.")
➔ P.503
What type of function is
color calibration? Color calibration improves color consistency by compensating for slight differences in how color appears when
printing due to individual variations or aging among the printers.
We recommend color calibration in the following situations.
• After initial printer installation
• After Printhead replacement
• When you sense a change of color compared to previously
• To print with colors aligned from multiple printers
• When the execution guide is displayed
(See "Color Calibration Using the Printer Sensor.") ➔ P.794
Can I perform duplex
printing? This printer cannot perform duplex printing.
If you use the Folded Duplex function in the Free Layout of Windows software, you can print two pages one-sided,
fold them at the center and suspend them to substitute for duplex printing.
(See "Prints using Folded Duplex (Windows).")
➔ P.228
Frequently Asked Questions iPF8400S
User's Guide
Troubleshooting
Frequently Asked Questions
920