Canon imagePROGRAF iPF8400S User Manual
Page 903
After you execute Repl. maint cart and replace the Maintenance Cartridge, a message will appear on the Display
Screen requesting you to replace the Shaft Cleaner. Select Yes and press the OK button. When a message requests
you to open the Top Cover, go to step 5.
1
On the Tab Selection screen of the Control Panel, press
◀ or ▶ to se-
lect the Settings/Adj. tab (
).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Maintenance, and then press the OK button.
4
Press ▲ or ▼ to select Repl. S. Cleaner, and then press the OK button.
The Carriage moves. When it finishes moving, instructions are displayed on the Display Screen.
5
Open the Top Cover.
Note
•
If you do not respond within two minutes, shaft cleaner replacement is canceled. In this case, repeat the procedure.
iPF8400S
Replacing the Maintenance Cartridge
Maintenance and Consumables
Maintenance Cartridge
903